آیسی درایو استپرموتور TLE4729G

این قطعه جهت استپر موتور در ایسیوکروز CGD استفاده میشود. مشابه این قطعه می توان از آی سی های B58428 و TLE4728G استفاده نمود .

2-Phase Stepper-Motor Driver

TLE 4729 G is a bipolar, monolithic IC for driving bipolar stepper motors, DC motors and other inductive loads that operate by constant current. The control logic and power output stages for two bipolar windings are integrated on a single chip which permits switched current control of motors with 0.7 A per phase at operating voltages up to 16 V. The direction and value of current are programmable for each phase via separate control inputs. A common oscillator generates the timing for the current control and turn-on with phase offset of the two output stages. The two output stages in full-bridge configuration include fast integrated free wheeling diodes and are free of crossover current. The device can be driven directly by a microprocessor in several modes by programming phase direction and current control of each bridge independently.With the two error outputs the TLE 4729 G signals malfunction of the device. Setting the control inputs high resets the error flag and by reactivating the bridges one by one the location of the error can be found.

Features:

2´ 0.7 amp. full bridge outputs
Integrated driver, control logic and current control (chopper)
Fast free-wheeling diodes
Max. supply voltage 45 V
Output stages are free of crossover current
Offset-phase turn-ON of output stages
All outputs short-circuit proof
Error-flag for overload, open load, overtemperature
•SMD package P-DSO-24-3